Jeep GLADIATOR 2023 Скачать руководство пользователя страница 109

Страница: 109 / 420

GETTING TO KNOW YOUR VEHICLE

107

(Continued)

ROOF LUGGAGE RACK — IF EQUIPPED

NOTE:

Roof rack applications are for Hard Top models ONLY.
The Roof Luggage Rack is designed to allow for carrying an

additional cargo load on vehicles equipped with a Hard

Top. The load carried on the roof, when equipped with a

luggage rack, must not exceed 100 lb (45 kg), this

includes the weight of the crossbars, and it should be

uniformly distributed over the cargo area.
Crossbars should always be used whenever cargo is

placed on the roof rack. Check the straps frequently to be

sure that the load remains securely attached.

NOTE:

Crossbars can be purchased at an authorized dealer

through Mopar® parts.
External racks do not increase the total load carrying

capacity of the vehicle. Be sure that the total occupant

and luggage load inside the vehicle, plus the load on the

luggage rack, does not exceed the maximum vehicle load

capacity.

WARNING!

Cargo must be securely tied down before driving your

vehicle. Improperly secured loads can fly off the vehicle,

particularly at high speeds, resulting in personal injury

or property damage. Follow the roof rack cautions when

carrying cargo on your roof rack.

CAUTION!



To avoid damage to the roof rack and vehicle, do not

exceed the maximum roof rack load capacity. Always

distribute heavy loads as evenly as possible and

secure the load appropriately.



Long loads, which extend over the windshield, should

be secured to both the front and rear of the vehicle.



Place a blanket or other protection between the

surface of the roof and the load.



Travel at reduced speeds and turn corners carefully

when carrying large or heavy loads on the roof rack.

Wind forces, due to natural causes or nearby truck

traffic, can add sudden upward lift. It is recom

mended to not carry large flat loads, such as wood

panels or surfboards, which may result in damage to

the cargo or your vehicle.



Load should always be secured to crossbars first,

with tie down loops used as additional securing

points if needed. Tie loops are intended as supple

mentary tie down points only. Do not use ratcheting

mechanisms with the tie loops. Check the straps

frequently to be sure that the load remains securely

attached.

CAUTION!

23_JT_OM_EN_USC_t.book Page 107

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Бренды по названию

Популярные бренды