Jeep GLADIATOR 2023 Скачать руководство пользователя

Страница: 118 / 420

116

GETTING TO KNOW YOUR INSTRUMENT PANEL

NSTRUMENT

LUSTER

ISPLAY

ENU

TEMS

NOTE:

Depending on the vehicle’s options, feature settings

may vary.

Speedometer

Push and release the up

or down

arrow button until

the speedometer menu icon is displayed in the instrument

cluster display. Push and release the OK button to toggle

between mph and km/h.

Vehicle Info

Push and release the up

or down

arrow button until

the Vehicle Info menu icon is displayed in the instrument
cluster display. Push and release the left

or right

arrow button to scroll through the information submenus

and push and release the OK button to select or reset the

resettable submenus.

Off Road — If Equipped

Push and release the up

or down

arrow button until

the Off Road menu icon is displayed in the instrument
cluster display. Push and release the left

or right

arrow button to scroll through the information submenus.
Drivetrain



Front Wheel Angle: displays the graphical and numer

ical value of calculated average front wheel angle from

the steering wheel orientation.



Transfer Case Lock Status: displays “Lock” graphic only

during 4WD High, 4WD Auto, or 4WD Low status.



Axle Lock And Sway Bar Status (if equipped): displays

front and rear or rear only axle locker graphic, and sway

bar connection graphic with text message (connected

or disconnected).

Pitch And Roll
Displays the pitch and roll of the vehicle in the graphic with

the angle number on the screen.

NOTE:

When vehicle speed becomes too high to display the pitch

and roll, “- -” will display in place of the numbers, and the

graphic will be grayed out. A message indicating the

necessary speed for the feature to become available will

also display.

Driver Assist — If Equipped

The Driver Assist menu displays the status of the

ACC system.

Push and release the up

or down

arrow button until

the Driver Assist menu is displayed in the instrument

cluster display.
Adaptive Cruise Control (ACC) Feature — If Equipped
The instrument cluster display displays the current ACC

system settings. The information displayed depends on

ACC system status.
Push the ACC ON/OFF button (located on the steering

wheel) until one of the following displays in the instrument

cluster display:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read “Adaptive

Cruise Control Off.”
Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed setting has

not been selected, the display will read “Adaptive Cruise

Control Ready.”
Push the SET + or the SET - button (located on the steering

wheel), and the following will display in the instrument

cluster display.
ACC SET
When ACC is set, the set speed will display in the

instrument cluster.
The ACC screen may display once again if any ACC activity

occurs, which may include any of the following:



System Cancel



Driver Override



System Off

Tire Pressure

Coolant Temperature

Transmission Temperature

— Automatic Transmission

Only

Oil Pressure

Oil Temperature

Oil Life

Battery Voltage

Diesel Exhaust Fluid

Level — If Equipped

23_JT_OM_EN_USC_t.book Page 116

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды