Jeep GLADIATOR 2023 Скачать руководство пользователя

Страница: 284 / 420

282

SAFETY

Seat Belt Extender

If a seat belt is not long enough to fit properly, even when

the webbing is fully extended and the adjustable upper

shoulder belt anchorage (if equipped) is in its lowest

position, an authorized dealer can provide you with a Seat

Belt Extender. The Seat Belt Extender should be used only

if the existing seat belt is not long enough. When the Seat

Belt Extender is not required for a different occupant, it

must be removed.

Seat Belts And Pregnant Women

Seat belts must be worn by all occupants including

pregnant women: the risk of injury in the event of an

accident is reduced for the mother and the unborn child if

they are wearing a seat belt.
Position the lap belt snug and low below the abdomen and

across the strong bones of the hips. Place the shoulder

belt across the chest and away from the neck. Never place

the shoulder belt behind the back or under the arm.

Seat Belt Pretensioner

The front outboard seat belt system is equipped with

pretensioning devices that are designed to remove slack

from the seat belt in the event of a collision. These devices

may improve the performance of the seat belt by removing

slack from the seat belt early in a collision. Pretensioners

work for all size occupants, including those in child

restraints.

NOTE:

These devices are not a substitute for proper seat belt

placement by the occupant. The seat belt still must be

worn snugly and positioned properly.
The pretensioners are triggered by the Occupant Restraint

Controller (ORC). Like the air bags, the pretensioners are

single use items. A deployed pretensioner or a deployed

air bag must be replaced immediately.

Energy Management Feature

The front outboard seat belt system is equipped with an

Energy Management feature that may help further reduce

the risk of injury in the event of a collision. The seat belt

system has a retractor assembly that is designed to

release webbing in a controlled manner.

WARNING!



Wearing your seat belt incorrectly could make your

injuries in a collision much worse. You might suffer

internal injuries, or you could even slide out of the

seat belt. Follow these instructions to wear your seat

belt safely and to keep your passengers safe, too.



Position the shoulder belt across the shoulder and

chest with minimal, if any slack so that it is comfort

able and not resting on your neck. The retractor will

withdraw any slack in the shoulder belt.



Misadjustment of the seat belt could reduce the

effectiveness of the safety belt in a crash.



Always make all seat belt height adjustments when

the vehicle is stationary.

WARNING!



ONLY use a Seat Belt Extender if it is physically

required in order to properly fit the original seat belt

system. DO NOT USE the Seat Belt Extender if, when

worn, the distance between the front edge of the

Seat Belt Extender buckle and the center of the occu

pant’s body is LESS than 6 inches.



Using a Seat Belt Extender when not needed can

increase the risk of serious injury or death in a colli

sion. Only use the Seat Belt Extender when the lap

belt is not long enough and only use in the recom

mended seating positions. Remove and store the

Seat Belt Extender when not needed.

23_JT_OM_EN_USC_t.book Page 282

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды