Jeep GLADIATOR 2023 Скачать руководство пользователя

Страница: 195 / 420

STARTING AND OPERATING

193

2. Remove two nuts and one bolt from the underside of

the vehicle for each of the four brackets. Repeat for

other side of vehicle.

Underside Nuts

3. After all bolts and nuts have been removed, pull the

side step assembly off of the vehicle.

4. To reinstall the side steps align the studs to the body

side holes and fasten all nuts on all four brackets.

Then secure all four bolts to the underbody. Repeat

the reassembly procedure for the other side.

Bumper End Cap Removal — If Equipped

The end caps on your vehicle’s front bumper can be

removed by the following steps:

NOTE:

Bumper end caps are removable on steel bumpers only.
1. Loosen the two bolts that retain the GAWR bracket

(Bolts #1 and #2) to the end cap using a T45 Torx bit

screwdriver. Do not remove the bolts.

Bolt #1

Bolt #2

2. Remove the remaining eight bolts.
3. Gently remove the end cap from the vehicle and store

it where it will not get damaged.

4. Repeat this procedure on the other side.

The Basics Of Off-Road Driving

You will encounter many types of terrain driving off-road.

You should be familiar with the terrain and area before

proceeding. There are many types of surface conditions:

hard-packed dirt, gravel, rocks, grass, sand, mud, snow and

ice. Every surface has a different effect on your vehicle's

steering, handling and traction. Controlling your vehicle is

one of the keys to successful off-road driving, so always

keep a firm grip on the steering wheel and maintain a good

driving posture. Avoid sudden accelerations, turns or

braking. In most cases, there are no road signs, posted

speed limits or signal lights. Therefore, you will need to use

your own good judgment on what is safe and what is not.

When on a trail, you should always be looking ahead for

surface obstacles and changes in terrain. The key is to plan

your future driving route while remembering what you are

currently driving over.

NOTE:

It is recommended that the Stop/Start system be disabled

during off-road use.

WARNING!

Always wear your seat belt and firmly tie down cargo.

Unsecured cargo can become projectiles in an off-road

situation.

CAUTION!

Never park your vehicle over dry grass or other

combustible materials. The heat from your vehicle

exhaust system could cause a fire.

23_JT_OM_EN_USC_t.book Page 193

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды