Jeep GLADIATOR 2023 Скачать руководство пользователя

Страница: 175 / 420

STARTING AND OPERATING

173

Front Park Assist Audible Alerts
ParkSense will turn off the Front Park Assist audible alert

(chime) after approximately three seconds when an

obstacle has been detected, the vehicle is stationary, and

the brake pedal is applied.
Adjustable Chime Volume Settings
The Front and Rear chime volume settings are

programmable.
The settings may be programmed through the Uconnect

system

page 199.

The chime volume settings include low, medium, and high.

The factory default volume setting is medium.
ParkSense will retain its last known configuration state

through ignition cycles.

NABLING

ISABLING

ARK

ENSE

ParkSense can be enabled and disabled with

the ParkSense switch.

When the ParkSense switch is pushed to disable the

system, the instrument cluster display will show the

“PARKSENSE OFF” message for approximately five

seconds.
When the gear selector is moved to REVERSE and the

system is disabled, the instrument cluster display will

show the “PARKSENSE OFF” message for as long as the

vehicle is in REVERSE.

The ParkSense switch LED will be on when ParkSense is

disabled or requires service. The ParkSense switch LED

will be off when the system is enabled. If the ParkSense

switch is pushed, and the system requires service, the

ParkSense switch LED will blink momentarily, and then the

LED will be on.

ERVICE

ARK

ENSE

ARK

SSIST

YSTEM

During vehicle start up, when the ParkSense system has

detected a faulted condition, the instrument cluster will

actuate a single chime, once per ignition cycle, and it will

display the “PARKSENSE UNAVAILABLE WIPE REAR

SENSORS”, “PARKSENSE UNAVAILABLE WIPE FRONT

SENSORS” or “PARKSENSE UNAVAILABLE SERVICE

REQUIRED” message. When the gear selector is moved to

REVERSE and the system has detected a faulted

condition, the instrument cluster display will display a

“PARKSENSE UNAVAILABLE WIPE REAR SENSORS” or

“PARKSENSE UNAVAILABLE SERVICE REQUIRED”

message for as long as the vehicle is in REVERSE.

Under this condition, ParkSense will not operate.
If “PARKSENSE UNAVAILABLE WIPE REAR SENSORS” or

“PARKSENSE UNAVAILABLE WIPE FRONT SENSORS”

appears in the instrument cluster display make sure

the outer surface and the underside of the rear fascia/

bumper and/or front fascia/bumper is clean and clear of

snow, ice, mud, dirt or other obstruction and then cycle the

ignition. If the message continues to appear, see an

authorized dealer.

If the “PARKSENSE UNAVAILABLE SERVICE REQUIRED”

message appears in the instrument cluster display, see an

authorized dealer.

LEANING

ARK

ENSE

YSTEM

Clean the ParkSense sensors with water, car wash soap,

and a soft cloth. Do not use rough or hard cloths. In

washing stations, clean sensors quickly keeping the vapor

jet/high pressure washing nozzles at least 4 inches

(10 cm) from the sensors. Do not scratch or poke the

sensors. Otherwise, you could damage the sensors.

ARK

ENSE

YSTEM

SAGE

RECAUTIONS

NOTE:



Ensure that the front and rear fascia/bumpers are

free of snow, ice, mud, dirt and debris to keep the

ParkSense system operating properly.



Jackhammers, large trucks, and other vibrations could

affect the performance of ParkSense.



When you turn the ParkSense system off, the instru

ment cluster display will show a vehicle graphic of the

ParkSense on/off state for two seconds. Furthermore,

once you turn ParkSense off, it remains off until you

turn it on again, even if you cycle the ignition.



When you move the gear selector to the REVERSE posi

tion and ParkSense is turned off, the instrument

cluster display will show the “ParkSense OFF”

message. This message will be displayed for as long as

the vehicle is in REVERSE.

23_JT_OM_EN_USC_t.book Page 173

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды