Jeep GLADIATOR 2023 Скачать руководство пользователя

Страница: 386 / 420

384

SERVICING AND MAINTENANCE

(Continued)

READWEAR

The Treadwear grade is a comparative

rating, based on the wear rate of the tire

when tested under controlled conditions

on a specified government test course.

For example, a tire graded 150 would

wear one and one-half times as well on

the government course as a tire graded

100. The relative performance of tires

depends upon the actual conditions of

their use, however, and may depart

significantly from the norm due to

variations in driving habits, service

practices, and differences in road

characteristics and climate.

RACTION

RADES

The Traction grades, from highest to

lowest, are AA, A, B, and C. These grades

represent the tire's ability to stop on wet

pavement, as measured under controlled

conditions on specified government test

surfaces of asphalt and concrete.

A tire marked C may have poor traction

performance.

EMPERATURE

RADES

The Temperature grades are A (the

highest), B, and C, representing the tire's

resistance to the generation of heat and

its ability to dissipate heat, when tested

under controlled conditions on a

specified indoor laboratory test wheel.
Sustained high temperature can cause

the material of the tire to degenerate

and reduce tire life, and excessive

temperature can lead to sudden tire

failure.

The grade C corresponds to a level of

performance, which all passenger

vehicle tires must meet under the

Federal Motor Vehicle Safety Standard

No. 109. Grades B and A represent

higher levels of performance on the

laboratory test wheel, than the minimum

required by law.

STORING THE VEHICLE

WARNING!

The traction grade assigned to this tire is based on

straight-ahead braking traction tests, and does not

include acceleration, cornering, hydroplaning, or peak

traction characteristics.

WARNING!

The temperature grade for this tire is established for a

tire that is properly inflated and not overloaded.

Excessive speed, under-inflation, or excessive loading,

either separately or in combination, can cause heat

build-up and possible tire failure.

WARNING!



Take care to avoid the radiator cooling fan whenever

the hood is raised. It can start anytime the ignition

switch is ON. You can be injured by moving fan

blades.



Remove any metal jewelry such as rings, watch

bands and bracelets that could make an inadvertent

electrical contact. You could be seriously injured.

23_JT_OM_EN_USC_t.book Page 384

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды