Jeep GLADIATOR 2023 Скачать руководство пользователя

Страница: 60 / 420

GETTING TO KNOW YOUR VEHICLE

Driver And Passenger Temperature Up And

Down Buttons

These buttons provide the driver and passenger with

independent temperature control.

Push the red button on the faceplate or

touchscreen or press and slide the

temperature bar towards the

red arrow button on the touchscreen

for warmer temperature settings.

Push the blue button on the faceplate or

touchscreen or press and slide the

temperature bar towards the

blue arrow button on the touchscreen

for cooler temperature settings.

SYNC Button

Press the SYNC button on the touchscreen to

toggle the Sync feature on/off. The SYNC

indicator illuminates when SYNC is on.

SYNC is used to synchronize the passenger

temperature setting with the driver temperature setting.

Changing the passenger temperature setting while in

SYNC will automatically exit this feature.

NOTE:

The SYNC button is only available on the touchscreen.

Blower Control

Blower Control regulates the amount of air

forced through the Climate Control system.

There are seven blower speeds available.

Adjusting the blower will cause automatic

mode to switch to manual operation. The speeds can be

selected using either the blower control knob on the

faceplate or the buttons on the touchscreen.
Faceplate
The blower speed increases as you turn the blower control

knob clockwise from the lowest blower setting. The blower

speed decreases as you turn the blower control knob

counterclockwise.
Touchscreen
Use the small blower icon to reduce the blower setting and

the large blower icon to increase the blower setting.

Blower can also be selected by pressing the blower bar

area between the icons.

Mode Control

Turn the mode control knob or press one of the

Mode buttons on the touchscreen to adjust

airflow distribution. The airflow distribution

mode can be adjusted so air comes from the

instrument panel outlets, floor outlets, defrost outlets and

demist outlets.

Panel Mode

Air comes from the outlets in the instrument

panel. Each of these outlets can be individually

adjusted to direct the flow of air. The air vanes

of the center outlets and outboard outlets can

be moved up and down or side to side to regulate airflow

direction. There is a shut-off wheel located below the air

vanes to shut off or adjust the amount of airflow from

these outlets.

Bi-Level Mode

Air comes from the instrument panel outlets

and floor outlets. A slight amount of air is

directed through the defrost and side window

demister outlets.

NOTE:

Bi-Level mode is designed under comfort conditions to

provide cooler air out of the panel outlets and warmer air

from the floor outlets.

Floor Mode

Air comes from the floor outlets. A slight

amount of air is directed through the defrost

and side window demister outlets.



Do not use scrapers, sharp instruments, or abrasive

window cleaners on the interior surface of the window.



Keep all objects a safe distance from the window.

CAUTION!

23_JT_OM_EN_USC_t.book Page 58

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды