Jeep GLADIATOR 2023 страница 126 Скачать руководство пользователя

Страница: 126 / 420

124

GETTING TO KNOW YOUR INSTRUMENT PANEL

If the light continues to flash when the vehicle is running,

immediate service is required and you may experience

reduced performance, an elevated/rough idle, or engine

stall and your vehicle may require towing. The light will

come on when the ignition is placed in the ON/RUN or

ACC/ON/RUN position and remain on briefly as a bulb

check. If the light does not come on during starting, have

the system checked by an authorized dealer.

Engine Coolant Temperature Warning

Light

This warning light warns of an overheated

engine condition. If the engine coolant

temperature is too high, this indicator will

illuminate and a single chime will sound. If the

temperature reaches the upper limit, a continuous chime

will sound for four minutes or until the engine is able to

cool; whichever comes first.
If the light turns on while driving, safely pull over and stop

the vehicle. If the Air Conditioning (A/C) system is on, turn

it off. Also, shift the transmission into NEUTRAL and idle

the vehicle. If the temperature reading does not return to

normal, turn the engine off immediately and call for

service

page 325.

Hood Open Warning Light

This indicator will illuminate when the hood is

ajar/open and not fully closed.

NOTE:

If the vehicle is moving, there will also be a single chime.

Oil Pressure Warning Light

This warning light will illuminate, and a chime

will sound, to indicate low engine oil pressure.

If the light and chime turn on while driving,

safely stop the vehicle and turn off the engine

as soon as possible. After the vehicle is safely stopped,

restart the engine and monitor the Oil Pressure Warning

Light. If the Oil Pressure Warning Light is still illuminated,

turn the engine OFF and contact an authorized dealer for

further assistance. Do not operate the vehicle until the

cause is corrected. If the light is no longer illuminated, the

engine can be operated but it is recommended to take the

vehicle to an authorized dealer as soon as possible.
Do not operate the vehicle until the cause is corrected.

This light does not indicate how much oil is in the engine.

The engine oil level must be checked under the hood.

Oil Temperature Warning Light

This warning light will illuminate to indicate the

engine oil temperature is high. If the light turns

on while driving, stop the vehicle and shut off

the engine as soon as possible. Wait for oil

temperature to return to normal levels.

Seat Belt Reminder Warning Light

This warning light indicates when the driver or

passenger seat belt is unbuckled. When the

ignition is first placed in the ON/RUN or ACC/

ON/RUN position and if the driver’s seat belt is

unbuckled, a chime will sound and the light will turn on.

When driving, if the driver or front passenger seat belt

remains unbuckled, the Seat Belt Reminder Light will flash

or remain on continuously and a chime will sound

page 277.

Rear Seat Belt Reminder Indicator Light —

If Equipped With A Base Instrument

Cluster

This light indicates when a rear seat belt is

unbuckled in the second row. When the ignition

is first placed in the ON/RUN or ACC/ON/RUN

position, and if a seat belt in the second row is

unbuckled, a light corresponding to the specific seat will

turn on in the upper right portion of the instrument cluster

display, momentarily replacing the configurable corner

information. If a second row seat belt that was buckled at

the start of the trip is unbuckled, the Rear Seat Belt

Reminder Light will change from the buckled to the

unbuckled symbol, and a chime will sound

page 277.

Transmission Temperature Warning

Light — If Equipped

This warning light will illuminate to warn of a

high transmission fluid temperature. This may

occur with strenuous usage such as trailer

towing. If this light turns on, stop the vehicle and

run the engine at idle or slightly faster, with the

transmission in PARK (P) or NEUTRAL (N), until the light

turns off. Once the light turns off, you may continue to drive

normally. If Manual transmission equipped, this warning

will illuminate to warn of high clutch temperature. This may

occur with driver misuse of clutch pedal or resting foot on

the clutch pedal or partially engaging the clutch for longer

duration. If the light turns on, it will be with an additional

CLUTCH HOT message. Stop the vehicle safely and run the

engine at idle with transmission gear in NEUTRAL (N) until

the light turns off. Once the light turns off, follow the

message displayed in the instrument cluster.

23_JT_OM_EN_USC_t.book Page 124

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды