Jeep GLADIATOR 2023 Скачать руководство пользователя

Страница: 19 / 420

GETTING TO KNOW YOUR VEHICLE

If the Vehicle Security Light turns on during normal vehicle

operation (vehicle running for longer than ten seconds), it

indicates that there is a fault in the electronics. Should

this occur, have the vehicle serviced as soon as possible

by an authorized dealer.

All of the key fobs provided with your new vehicle have

been programmed to the vehicle electronics

page 404.

NOTE:

A key fob that has not been programmed is also

considered an invalid key.

IGNITION SWITCH

EYLESS

NTER

‘

™ I

GNITION

This feature allows the driver to operate the ignition switch

with the push of a START/STOP ignition button as long as

the key fob is in the passenger compartment.
The START/STOP ignition button has several operating

modes that are labeled and will illuminate when in

position. These modes are OFF, ACC, RUN, and START.

START/STOP Ignition Button

The push button ignition can be placed in the following

modes:
OFF



The engine is stopped.



Some electrical devices (e.g. power locks, alarm, etc.)

are available.

ACC



Engine is not started.



Some electrical devices are available

(power windows, etc.).

RUN



Driving position.



All electrical devices are available.

START



The engine will start.

NOTE:

In case the ignition switch does not change with the push

of the START/STOP ignition button, the key fob may have

a low or depleted battery. In this situation, a backup

method can be used to operate the ignition switch. Put the

nose side of the key fob (side with the mechanical flip key)

against the START/STOP ignition button and push to

operate the ignition switch.

Backup Starting Method

CAUTION!

The Sentry Key Immobilizer system is not compatible

with some aftermarket remote starting systems. Use of

these systems may result in vehicle starting problems

and loss of security protection.

1 — OFF
2 — ACC
3 — RUN

CAUTION!



Do not press the mechanical key against the

START/STOP ignition button.



Do not use sharp metal objects (e.g. screwdriver etc.)

to pry the button out of the ignition switch. This

button comes as an assembly, and is not removable.

This can damage the silicone shield.

23_JT_OM_EN_USC_t.book Page 17

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды