Jeep GLADIATOR 2023 Скачать руководство пользователя

Страница: 144 / 420

142

STARTING AND OPERATING

MANUAL TRANSMISSION — IF EQUIPPED

NOTE:

During cold weather, you may experience increased effort

in shifting until the transmission fluid warms up. This is

normal.

Manual Transmission Shifter

To shift the gears, fully press the clutch pedal and place

the gear selector into the desired gear position (the

diagram for the engagement of the gears is displayed on

the handle of the selector). The gear position will be

displayed in the instrument cluster.

To engage REVERSE gear from the NEUTRAL position, lift

the REVERSE ring, located below the knob and move the

gear selector all the way left and then forward.

HIFTING

Fully press the clutch pedal before shifting gears. As you

release the clutch pedal, lightly press the accelerator

pedal.
You should always use FIRST gear when starting from a

standing position.

NOTE:

A certain amount of noise from the transmission is normal.

This noise can be most noticeable when the vehicle is

idling in NEUTRAL with the clutch engaged (clutch pedal

released), but it may also be heard when driving. The noise

may also be more noticeable when the transmission is

warm. This noise is normal and is not an indication of a

problem with your clutch or transmission.

WARNING!

You or others could be injured if you leave the vehicle

unattended without having the parking brake fully

applied. The parking brake should always be applied

when the driver is not in the vehicle, especially on an

incline.

CAUTION!



Never drive with your foot resting on or partially

pressing the clutch pedal. Never attempt to hold the

vehicle on a hill with the clutch pedal partially

engaged. Operating vehicle in this manner may

cause the clutch to overheat and cause permanent

damage to the clutch. If you continue to operate the

vehicle in this manner, the “CLUTCH HOT” message

or Transmission Temperature Warning Light will be

displayed in the instrument cluster. For more infor

mation

page 122.



Do not drive with your hand resting on the gear

selector as the force exerted, even if slight, could

lead over time to premature wear of the gearbox

internal components.

23_JT_OM_EN_USC_t.book Page 142

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды