Jeep GLADIATOR 2023 страница 147 Скачать руководство пользователя

Страница: 147 / 420

STARTING AND OPERATING

145

GNITION

ARK

NTERLOCK

This vehicle is equipped with an Ignition Park Interlock

system which requires the transmission to be in PARK

before the ignition can be turned to the OFF position. This

helps the driver avoid inadvertently leaving the vehicle

without placing the transmission in PARK. This system

also locks the transmission in PARK whenever the ignition

is in the OFF position.

NOTE:

The transmission is NOT locked in PARK when the ignition

is in the ACC position (even though the engine will be off).

Ensure that the transmission is in PARK, and the ignition

is OFF (not in ACC position) before exiting the vehicle.

RAKE

RANSMISSION

HIFT

NTERLOCK

(BTSI) S

YSTEM

This vehicle is equipped with a BTSI system that holds the

transmission gear selector in PARK unless the brakes are

applied. To shift the transmission out of PARK, the engine

must be running and the brake pedal must be pressed.

The brake pedal must also be pressed to shift from

NEUTRAL into DRIVE or REVERSE when the vehicle is

stopped or moving at low speeds.

8–S

PEED

UTOMATIC

RANSMISSION

The transmission gear range (PRNDM) is displayed both

beside the gear selector and in the instrument cluster.

To select a gear range, push the lock button on the gear

selector and move the selector rearward or forward. To

shift the transmission out of PARK, the engine must be

running and the brake pedal must be pressed. You must

also press the brake pedal to shift from NEUTRAL into

DRIVE or REVERSE when the vehicle is stopped or moving

at low speeds. Select the DRIVE range for normal driving.

NOTE:

In the event of a mismatch between the gear selector

position and the actual transmission gear (for example,

driver selects PARK while driving), the position indicator

will blink continuously until the selector is returned to the

proper position, or the requested shift can be completed.
The electronically controlled transmission adapts its shift

schedule based on driver inputs, along with environmental

and road conditions. The transmission electronics are

self-calibrating; therefore, the first few shifts on a new

vehicle may be somewhat abrupt. This is a normal

condition, and precision shifts will develop within a few

hundred miles (kilometers).
Only shift from DRIVE to PARK or REVERSE when the

accelerator pedal is released and the vehicle is stopped.

Be sure to keep your foot on the brake pedal when shifting

between these gears.



When exiting the vehicle, always make sure the igni

tion is in the OFF position, remove the key fob from

the vehicle, and lock the vehicle.



Never leave children alone in a vehicle, or with

access to an unlocked vehicle. Allowing children to

be in a vehicle unattended is dangerous for a

number of reasons. A child or others could be seri

ously or fatally injured. Children should be warned

not to touch the parking brake, brake pedal or the

transmission gear selector.



Do not leave the key fob in or near the vehicle (or in

a location accessible to children), and do not leave

the ignition in the ACC or ON/RUN position. A child

could operate power windows, other controls, or

move the vehicle.

CAUTION!



Shift into or out of PARK or REVERSE only after the

vehicle has come to a complete stop.



Do not shift between PARK, REVERSE, NEUTRAL, or

DRIVE when the engine is above idle speed.



Before shifting into any gear, make sure your foot is

firmly pressing the brake pedal.

WARNING!

23_JT_OM_EN_USC_t.book Page 145

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды