Jeep GLADIATOR 2023 страница 179 Скачать руководство пользователя

Страница: 179 / 420

STARTING AND OPERATING

177

(Continued)

REFUELING THE VEHICLE — GASOLINE

ENGINE (IF EQUIPPED)

UEL

ILLER

The fuel filler cap is located on the left side of the vehicle.

To access the fuel filler cap, push on the fuel filler door to

unlatch it. To close the fuel filler door, push on it a second

time. If the fuel filler cap is lost or damaged, be sure the

replacement cap is the correct one for this vehicle.
1. Open the fuel filler door.

Fuel Filler Door

2. Remove the fuel cap by rotating it counterclockwise.

Fuel Filler Cap

3. Fully insert the gasoline nozzle into the filler pipe.

Fill the vehicle with fuel.

4. When the fuel nozzle “clicks” or shuts off, the fuel

tank is full. Wait five seconds before removing the

fuel nozzle to allow excess fuel to drain from nozzle.

5. Remove gasoline nozzle, reinstall fuel cap and close

the fuel filler door.

NOTE:



When the fuel nozzle “clicks” or shuts off, the fuel tank

is full.



Tighten the fuel filler cap about a quarter turn until you

hear one click. This is an indication that the cap is prop

erly tightened.



If the fuel filler cap is not tightened properly, the MIL

will come on. Be sure the cap is tightened every time

the vehicle is refueled.

WARNING!



Never have any smoking materials lit in or near the

vehicle when the fuel door is open or the tank is

being filled.



Never add fuel when the engine is running. This is in

violation of most state and federal fire regulations

and may cause the Malfunction Indicator Light (MIL)

to turn on.



A fire may result if fuel is pumped into a portable

container that is inside of a vehicle. You could be

burned. Always place fuel containers on the ground

while filling.

CAUTION!



Damage to the fuel system or emission control

system could result from using an improper fuel filler

cap. A poorly fitting cap could let impurities into the

fuel system. Also, a poorly fitting aftermarket cap can

cause the Malfunction Indicator Light (MIL) to illumi

nate, due to fuel vapors escaping from the system.



To avoid fuel spillage and overfilling, do not “top off”

the fuel tank after filling.

WARNING!

23_JT_OM_EN_USC_t.book Page 177

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды