Jeep GLADIATOR 2023 Скачать руководство пользователя страница 162

Страница: 162 / 420

160

STARTING AND OPERATING

ANUALLY

URN

TOP

TART

YSTEM

Stop/Start OFF Switch

Push the Stop/Start OFF switch (located on the switch

bank). The light on the switch will illuminate. The “Stop/

Start OFF” message will appear in instrument cluster

display within the Stop/Start section, and the Autostop

function will be disabled

page 113.

NOTE:

The Stop/Start system will reset itself back to an ON

condition every time the ignition is turned off and back on.

ANUALLY

URN

TOP

TART

YSTEM

Push the Stop/Start Off switch (located on the switch

bank). The light on the switch will turn off.

YSTEM

ALFUNCTION

If there is a malfunction in the Stop/Start system, the

system will not shut down the engine. A “SERVICE STOP/

START SYSTEM” message and a yellow Stop/Start telltale

will appear in the instrument cluster display

page 113.

If the “SERVICE STOP/START SYSTEM” message appears

in the instrument cluster display, have the system

checked by an authorized dealer.

CRUISE CONTROL SYSTEMS — IF EQUIPPED

Your vehicle may be equipped with the Cruise Control

system, or the Adaptive Cruise Control (ACC) system:



Cruise Control will keep your vehicle at a constant

preset speed.



Adaptive Cruise Control (ACC) will adjust the vehicle

speed up to the preset speed to maintain a distance

with the vehicle ahead.

NOTE:



In vehicles equipped with ACC, if ACC is not enabled,

Fixed Speed Cruise Control will not detect vehicles

directly ahead of you. Always be aware of the feature

selected.



Only one Cruise Control feature can operate at a time.

For example, if Fixed Speed Cruise Control is enabled,

Adaptive Cruise Control will be unavailable, and vice

versa.

RUISE

ONTROL

When engaged, the Cruise Control system takes over

accelerator operations at speeds greater than 20 mph

(32 km/h).
The Cruise Control buttons are located on the right side of

the steering wheel.

Cruise Control Buttons

1 — SET (+)/Accel
2 — CANC/Cancel
3 — SET (-)/Decel
4 — On/Off
5 — RES/Resume

23_JT_OM_EN_USC_t.book Page 160

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Бренды по названию

Популярные бренды