Isel ICP 4030 iMC-P, Инструкция по сборке/Руководство по эксплуатации

Страница: 7 / 71

ICP 4030 iMC-P
6
/71
January
2018
The statements in these operating instructions apply to the following equipment /
technical level of the CNC machine control:
•
all motor output stages are fitted with Standstill monitoring (from 01/07/2008)
•
the operating software used is: ProNC /6/ / Remote /7/ from software version
V1.46.2.1
To install and set up software or the accessories, please also consult the other
manuals and instructions.
These are indicated in the source directory.
Example CNC basic machine ICP 4030:
•
(partly completed machine)
•
without tool
, no clear definition of the intended purpose
•
this CNC machine is delivered without a CE mark
•
the declaration of incorporation applies to this CNC machine.
Fig 1: ICP 4030 EC CNC basic machine
Example CNC basic machine ICP 4030:
•
Complete machine
•
fitted
with the tool
cutter spindle, so suitable for drilling / cutting
•
this CNC machine is delivered with a CE mark
•
the declaration of conformity applies to this CNC machine.
Fig 2: JCP 4030 EC CNC machine