Isel ICP 4030 iMC-P, Инструкция по сборке/Руководство по эксплуатации

Страница: 10 / 71

ICP 4030 iMC-P
9
/71
January
2018
•
CNC machines for milling:
o
The CNC cutting machines are designed for cutting / drilling the following materials:
Aluminium, copper, brass, plastics (e.g. GRP/fibre glass), wood
o
Processing magnesium is prohibited due to the risk of fire .
o
In the processing of steel / stainless steel only engraving works or processing with low
cutting forces is possible.
o
Cutters and drills may be used up to a maximum shaft diameter of 7 mm.
o
In the case of the tools form cutters and counter-bores for the wood sector, the cutting
diameter shall not exceed 45mm and the shank diameter shall not exceed 7mm.
•
The rapid traverse rates should, depending on the system size, not exceed the
value of 150 mm / sec to a maximum of 200mm / sec.
•
The feed speed of the tools in the material must be determined technologically
and should always be less than the rapid traverse rate.
•
The user is responsible for the secure clamping of the tools in the tool holder.
The (reasonably) foreseeable misuse includes the operation of the CNC machine by
two persons. It is prohibited for a person in the test mode (see Section 7.1 Operating
modes) to activate the acknowledgement button on the operating panel and the
other person to reach into the working area of the machine with opened door or
perform activities of any kind therein.
There must be no tampering with the lock of the protective cover (on the back).