Isel ICP 4030 iMC-P, Инструкция по сборке/Руководство по эксплуатации

Страница: 34 / 71

ICP 4030 iMC-P
33
/71
January
2018
6 Installation and commissioning
6.1
Safety notices
Observe the technical data of the machine and the pin
assignment in Chapter5.3.
Failure to observe the safety instructions may endanger persons
and objects due to mechanical or electrical influences or failure of
the device.
Failure to observe the safety regulations will result in the loss of all
claims for damages.
6.2
Preparation
Before making the connections, make sure that:
- no mechanical defects (loose parts) are visible on the machine
- all cables described in the scope of delivery are present
- the machine has been placed according to the installation instructions.
6.3 Create connections
- Connect power cable
- Connect the display to DVI
- Connect mouse and keyboard to USB
Configuration (if not yet pre-set)
- Configure motor currents and step resolution of the power output stages via
DIP switches. ( see Chapter 5.5 Setting the motor output stages )
COM interface on the PC /
Notebook: 9-pole Sub-D (plug)
serial cable Sub-D 9
(socket socket)