Isel ICP 4030 iMC-P, Инструкция по сборке/Руководство по эксплуатации

Страница: 11 / 71

ICP 4030 iMC-P
10 / 71 January
2018
3 Safety notices
Read this section of the Operating Instructions carefully before connecting and
operating the machine! As with all technical systems, faultless function and
operational safety can only be guaranteed with this machine if the general safety
precautions and the special safety instructions are observed during operation.
3.1 General safety notices
1. The machine must only be installed and commissioned by authorised personnel
with the appropriate qualifications.
2. The machine must only be used in accordance with these instructions. The
manufacturer excludes any liability for damages arising from use of the machine for
other applications.
3. The CNC machine may only be operated to process suitable materials using tried
and tested components. The use of non-approved materials and accessories (e.g.
cutters) may cause damage to the machine or components. In this case, the
manufacturer excludes any liability.
4. Before starting the machine, check that mains voltage specified on the rating plate
of the individual components mains voltage matches the mains voltage available.
The wrong mains voltage can destroy the machine and its components.
5. To prevent electric shocks, do not put any objects into the machine; an exception
to this is the proper replacement of parts in accordance with these operating
instructions.
6. Always isolate the machine from the mains before carrying out any maintenance
work.
7. Never operate the machine in locations where there is a risk of water or other liquids
entering the control unit behind the rear cover or the front panel controls.
8. The floor space of the machine must be sufficiently stable; please note the
permissible floor load.
9. The opening of the machine housing and repairs to the machine must only be
performed by authorised service technicians.
10. Please note that there may be risk of injury from a cutter clamped in the cutting
spindle.