Isel ICP 4030 iMC-P, Инструкция по сборке/Руководство по эксплуатации

Страница: 12 / 71

ICP 4030 iMC-P
11
/71
January
2018
11. The cutting machine may only be operated with original accessories, or accessories
approved by the manufacturer. When replacing parts in accordance with these
operating instructions, only original parts may be used. No liability shall be accepted
for damages caused by the use of non-approved accessories or external parts.
12. The cutting machine must not be used potentially explosive areas.
13. When laying the mains line, make sure there are no risks of tripping or damage to
the lines.
14. If, without the written consent of the manufacturer, a change to the CNC machine
or its components is made, the EC declaration of conformity issued shall become
invalid.
15. When cleaning the machine, avoid breathing in any dust created.
16. Clean the machine only with suitable cleaning agents (standard household, non-
abrasive cleaning agents).
17. Mobile telephones should not be used in the vicinity of the machine. Interference
with the CNC control cannot be ruled out.