Isel ICP 4030 iMC-P, Инструкция по сборке/Руководство по эксплуатации

Страница: 45 / 71

ICP 4030 iMC-P
44
/71
January
2018
6.6.2 Use of the ICP 4030 in DNC operation
In DNC mode (DNC mode), the stepper motor control of the machine is connected to
an operating PC (desktop PC or notebook) via the RS-232 serial interface.
In DNC mode, the loaded user programme is not executed in the flash memory, i.e.
ignored. The pre-setting of actions (e. g. homing, axis movements or output actions) is
triggered by the operator on the PC with the control software Remote / ProNC.
For information on operating and programming the CNC compact
machine in DNC mode, please refer to the Remote operating instructions
/3/.
Use of digital inputs and outputs and signalling in Remote/ProNC
The machines of the type ICP 3020 / ICP 4030 iMC-P each have 8 digital inputs and
outputs, which can be used by the user.
Important notices!!!
During an axis movement, no digital input can be read, since
the control must first send an acknowledgement signal as
feedback signal.
During an axis movement, no digital output can be read,
since the control must first send an acknowledgement signal
as feedback signal.
The signalling (menu: Settings Signalling) in the operator interface Remote (optional:
ProNC) is used with other
isel
-controllers for connection to higher-level controllers.
Important notice!!!
The configurable inputs and outputs for signalling cannot be
used in DNC mode! This means that operation/control via
external signals from a higher-level control (e. g. PLC) is not
possible.