Isel ICP 4030 iMC-P, Инструкция по сборке/Руководство по эксплуатации

Страница: 56 / 71

ICP 4030 iMC-P
55
/71
January
2018
13 Declaration of conformity or declaration of incorporation
In the Machinery Directive 2006/42/EG legally binding since 29.12.2009, the term
“ Machine “ is defined as follows (quote from MD, 2006/42/EC Article 2, Letter a):
"Machine"
•
an assembly, fitted with or intended to be fitted with a drive system other than
directly applied human or animal effort, consisting of linked parts or
components, at least one of which moves, and which are joined together
for
a specific application;
All isel CNC basic machines, supplied with a tool (e.g. processing or engraving
spindle, dosing unit, sensor like CCD camera or triangulation laser, water jet
nozzle, plasma burner or equiv.),are covered by the declaration of conformity
contained in these operating instructions.
These CNC machines are (task-related) are to be used for a specific application ,
which results from the type of the tool (fitted on a moving axis):
Tool = Machining spindle -> Application for milling, drilling
Tool = Engraving spindle -> Application for engraving
Tool = Dosing device -> Application for gluing, dosing etc.
In the Machinery Directive 98/37/EC, which is valid until 28 December 2009, the
term "partly completed machine / incomplete machine" or in the new Machinery
Directive 2006/42/EC, which is legally binding as of 29 December 2009, the term
"incomplete machine" is defined as follows (citation MRL 2006/42/EC, Article 2, letter
g):
“ partly completed ma chine“ “
•
An assembly that is almost machinery , but which in itself cannot perform a
specific application . A drive system represents a partly completed machine.
Partly completed machinery is only intended incorporated into or assembled
with other machinery or other partly completed machinery or equipment,
thereby forming machinery to which this Directive applies;
All isel CNC basic machines , supplied without a tool (e.g. processing or engraving
spindle, dosing unit, sensor like CCD camera or triangulation laser, water jet nozzle,
plasma burner or equiv.), and therefore not to be used
for a specific application are
covered by the declaration of incorporation contained in these operating instructions.