Isel ICP 4030 iMC-P, Инструкция по сборке/Руководство по эксплуатации

Страница: 13 / 71

ICP 4030 iMC-P
12
/71
January
2018
3.2
Special safety notices
•
The CNC machine is surrounded by a housing enclosing the working area or a
protective cover.
The transparent panes fixed in the machine frame or the protective cover
ensure the safety of operating personnel. The panes must not be removed. The
material of these panes is:
- PETG = Polyethylene terephthalate with glycol or
- Polycarbonate, e.g. brand name Makrolon ®
The transparent panes ensure during the operation of the machine (during set up
or processing of the component) protection against moving machine parts and
any tool or component parts ejected from the working area due to a break in the
material.
The housing reduces the noise level and holds back chips created in a chipping
process.
During processing , the protective hood is locked (bolt) and cannot be
opened. This safety device ( door lock , the so-called Schmersal switch ) must
not be removed or changed.
A CNC machine delivered with CE marking must not be started without a
full, intact housing including undamaged PETG or polycarbonate panes.
•
The drill or cutting tools used on the CNC machine with processing spindle
must, in the case of the tool holder SK11, have a maximum shaft diameter of
7 mm (standard).
If you are unsure or have any queries about the choice of tool,
please contact the application technology department at isel Germany AG.
•
The CNC basic machine without a housing or protective hood is a complete
machine under the Machinery Directive 2006/42/EG and is supplied without CE
marking. The declaration of incorporation and assembly instructions applies.
As
the operator of the CNC basic machine, you are responsible, based on your
risk assessment, for taking appropriate protective measures to meet the
safety requirements on the machine under the Machinery Directive
2006/42/EC.
•
Always make sure the components are sitting tightly. The use of a suitable, i.e. safe
component clamping device for the specific processing is the task of the operator
of the CNC machine. Unsuitable, unsafe clamping devices can if the component
comes loose from the clamping device during processing and lead to serious
accidents resulting in death or personal injury or serious damage to the component,
the tool, the clamping device and other machine parts.