Isel ICP 4030 iMC-P, Инструкция по сборке/Руководство по эксплуатации

Страница: 9 / 71

ICP 4030 iMC-P
8
/71
January
2018
isel -CNC basic machine:
In the new Machinery Directive 2006/42/EC legally binding since 29.12.2009, the
term “ partly completed machines “ is defined as follows (quote from MD, Article
2, Letter g):
“partly completed ma chine“
•
an assembly which is almost machinery but which cannot in itself perform a specific
application.
A drive system represents a partly completed machine. Partly completed
machinery is only intended incorporated into or assembled with other machinery or other
partly completed machinery or equipment, thereby forming machinery to which this
Directive applies;
Every isel -CNC basic machine delivered without a tool and therefore not for a
specific application , is partly completed machinery pursuant to the Machinery
Directive 2006/42/EC.
•
The CNC machine / CNC basic machine is designed for use in dry rooms
(workshops, labs or similar rooms) and industrial companies (maximum ambient
temperature: 40°C)
•
CNC machine:
o
The CNC machine (complete machine) must be used accordingly based on the type of the
tool fitted on the machine. This means, the concrete tool of the CNC machine determines
the proper use of the machine in accordance with the Machinery Directive (Annex I, Section
1.1.2). Under this premise, the CNC machine is suitable for milling, drilling, cutting,
engraving, dosing, measuring or water jet cutting. The CNC machine is not suitable for
graphite machining.
o
Suitable processing materials are light metals, plastics, wood, glass, circuit board materials
and the like.
o
Not permitted are materials that produce harmful gases when they are processed.
o
The CNC machine is prepared for an extraction device. This extraction is preferably suitable
for dry dust (wood dust, fibreglass / fibreglass-platinum dust and similar).
•
The CNC basis machine (partly completed machine) may be supplemented
by you as the buyer of the basic machine with a wide range of suitable
processing tools for the CNC machine (complete machine) in compliance with
the requirements of the Machinery Directive. You are responsible for the CE
certification if you deploy / use or sell (market) the machine. The CE certification
also contains the statutory mandatory marking of the safe machine with the CE
mark.