57
/71
January
2018
ICP 4030 iMC-P
_____________
13.2
Declaration of incorporation for (partly completed) basic machines
Declaration of incorporation as per Machinery Directive 2006/42/EC, appendix II B
The manufacturer
isel Germany AG
Bürgermeister-Ebert-Str. 40,
D-36124 Eichenzell
hereby declares that the following product
Product description:
isel
-Basis-Machine ICP 4030
Types:
ICP 4030 iMC-P
Art.-No.: 280270 xxxx
Rating plate:
fulfils the basic health and safety requirements of the
EC Machinery Directive 2006/42/EG Annex I
.
The following additional EU Directives relevant to this product were used:
EMC directive 2014/30/EU Low-voltage
directive 2014/35/EU
The following harmonised standards were applied:
EN ISO 12100:2010
Safety of Machinery
–
General Principles of Design
–
Risk
assessment and risk reduction
EN ISO 13857:2008
Safety of machinery - safety distances to prevent hazard zones being
reached by upper and lower limbs
EN 349:1993+A1:2008
Safety of machinery - Minimum gaps to avoid crushing of
parts of the human body
EN ISO 14120:2015
Safety of machinery - Guards - General requirements for the design and
construction of fixed and movable guards
EN ISO 13850:2015
Safety of machinery - Emergency-stop design principles
EN 60204-1/A1:2014
Safety of machinery - Electrical equipment of machines - Part 1. General
requirements
The
technical documentation
for this partly completed machine was drafted according to Annex
VII Section B. The manufacturer undertakes to transmit these technical documents electronically to
national authorities.
Authorised representative
for the compilation of the technical documentation is:
Mr Werner Kister
The product (partly completed machine) is intended to be incorporated into a machine or
assembled with other partly completed machinery to form a machine under the
MD 2006/42/EC
,
Article 1, Section (1), Letter a.
Commissioning of the partly completed machine (product) is prohibited until the machinery into
which this product has been incorporated or of which it is a component, fulfil the provisions of
all relevant directives (especially MD2006/42 / EC) and this (completed) machine has a CE
marking.
Place, Date:
Dermbach, 25 January 2012
Werner Kister, Executive Board
Содержание ICP 4030 iMC-P
