Isel ICP 4030 iMC-P, Инструкция по сборке/Руководство по эксплуатации

Страница: 16 / 71

ICP 4030 iMC-P
15
/71
January
2018
The measurements are done based on the size of the axes to be measured with a
radius of 50mm, 100mm, 150mm and 300mm. The shortest axis must always be taken
into consideration.
Each CNC machine will not be delivered until all parameters are within the
prescribed limits. The results of measurements are stored either as machine- or
order-related and archived.
Figure: Circularity measurement with Renishaw's QC10 circular form measuring system
4.3 Space required
The machine's space requirement is limited to the external dimensions and sufficient
space in front of the machine to be able to operate and set it up. At the back you need
about 10 cm space for the connectors. The cover of the housing opens upwards.
Figure: Dimensions and space required