Isel ICP 4030 iMC-P, Инструкция по сборке/Руководство по эксплуатации

Страница: 17 / 71

ICP 4030 iMC-P
16
/71
January
2018
Always keep the triangular wrench especially when transporting outside
the machine
.
When you set up your CNC machine, use only suitable, , secure clamping tools (see
chapter Accessories).
Always make sure the components are sitting tightly.
When planning the installation space for the CNC machine, all-round
access for trained personnel during a maintenance or service phase must
be taken into account!
4.4
Transporting the CNC machine
Remove the transport locks. Use only appropriate lifting devices (forklifts, trucks).
Only lift the machine from the bottom.
On subsequent transport, make sure that the mains and connection lines are not
damaged.
Remove the mains plug before any transport
When transporting the machine, make sure it is not exposed to
heavy vibrations
.
Always keep the triangular wrench for manually
unlocking the door outside the machine.
4.5 Setting up the CNC machine
The clamping area / processing area of the CNC machine and all axes are factory set
exactly perpendicularly.
Never loosen the fastenings of the axes or the mounting angle at
which the transverse axis is mounted (X-axis). Otherwise the
machine must be re-measured by a technician of the manufacturer
isel Germany AG.
Set the machine up on a level and
firm surface. You can compensate for
any unevenness in the floor/table with
the height-adjustable feet.
To accurately align the machine, you
need a spirit level with accuracy of at
least 0.1 mm/m. Secure the height of the
machine feet with the locknut.