Isel ICP 4030 iMC-P, Инструкция по сборке/Руководство по эксплуатации

Страница: 47 / 71

ICP 4030 iMC-P
46
/71
January
2018
Grease characteristics:
The isel special grease has the following characteristics:
•
huge reduction in wear
•
considerably less consumption
•
can be mixed with lithium and calcium greases
•
water-repellent
•
highly resistant to cold-, hot- and salt water and solvents
•
Temperature range: – 25°C to 200°C
•
emergency mode >300°C
•
up to 6 times longer service life
•
extremely good adhesion to metal surfaces
The classification and marking as per the EU-Directives 67/548/EEC and
88/379/EEC - Water hazard class 1.
7.2.3 Lubrication points of the linear axes X, Y and Z
To lubricate the Y-axis , push the T-slot plate completely forward* and then unscrew
it from the Y-axis (six screws).
Remove the plastic plug from underneath and lubricate through the now visible grease
nipple. The guide rails can be accessed through the sealing lips.
To remove the cover plate of the y-axis, loosen the fastening screws all around.
Indicates the access points to the lubrication
points in all drawings.
Fig 3: Lubrication points of the linear axes X, Y and Z
S