Isel ICP 4030 iMC-P, Инструкция по сборке/Руководство по эксплуатации

Страница: 23 / 71

22
/71
January
2018
ICP 4030 iMC-P
5.3.2 Front Panel Controls
Operating elements for the machine controller
No. Description Description
1 Emergency stop
button Switching off the power supply of the motor output stages and the working spindle.
2 3 Power-On button Power supply to the output stages is switched on.
3 Mode selector switch
This key switch switches between automatic and set-up mode. In automatic mode , the cover or door
can only be opened if the axes do not move and the connected milling spindle is switched off.
In set-up mode , the hood or door can only be opened when the working spindle is switched
off . In this operating mode, the axes can also be moved when the hood is open.
4 START button
In CNC mode, pressing the button starts the programme stored in the controller's flash memory.
The start button cannot be used in DNC mode.
5 STOP button
In CNC mode, pressing the STOP key interrupts a running user program / axis movement. The user programme /axis
movement can be continued by pressing the START button.
6 FAULT display The fault display indicates an error in the safety circuit.
7 COVER button
This button is used to open the cover (if there is one). The cover can only be opened if the conditions described under
"Mode selector switch" are met. The release to open the cover is indicated by the white illumination of the button.
8 ACK (Acknowledge) button This key has no function on this machine.