Isel ICP 4030 iMC-P, Инструкция по сборке/Руководство по эксплуатации

Страница: 30 / 71

29
/71
January
2018
ICP 4030 iMC-P
Milling spindle - 100 - 230V, connection 3-pole
This output can be used to connect either a milling spindle without speed control or
a frequency converter with associated main spindle drive (e.g. iSA 750) with speed
control. Depending on the application, the power supply line of the milling spindle
or the frequency inverter must be connected to the safety circuit module.
Remove the rear panel of the
machine and the housing
cover of the stepped motor
control (see Chapter 5.4.2).
Connect the cable to the
"Spindle 230V" socket with the
appropriate connection to the
safety circuit module.
If the machine is
delivered without
a milling spindle,
the connection
(X1) for a milling
spindle without
speed control is
assigned at the
factory.
Control Elements - Connecting operating elements
At this connection, the front operating elements (switches, buttons) are connected to
the machine control.
Connection X3 for frequency
inverter, max. Switching capacity
100-230V / 6A
Connection X3 for
milling spindle, max.
Switching capacity 100-230V / 6A