Isel ICP 4030 iMC-P, Инструкция по сборке/Руководство по эксплуатации

Страница: 57 / 71

ICP 4030 iMC-P
56
/71
January
2018
_____________
_
13.1
Declaration of Conformity for (complete) machine
EC Declaration of Conformity as per Machinery Directive 2006/42/EC, appendix II A
The manufacturer
isel Germany AG
Bürgermeister-Ebert-Str. 40,
D-36124 Eichenzell
hereby declares that the following product Product description
isel -CNC-Machine ICP 4030
Types: ICP 4030 iMC-P Art.-No.: 280270 xxxx
Rating plate:
satisfies the provisions of the above-mentioned Directive including any amendments valid at the time
this declaration was given.
The following harmonised standards were applied:
EN ISO 12100:2010 Safety of Machinery – General Principles
of Design – Risk assessment and risk
reduction
EN ISO 13857:2008 Safety of machinery - safety distances to prevent
hazard zones being reached by upper and lower
limbs
EN 349:1993+A1:2008
Safety of machinery - Minimum gaps to avoid
crushing of parts of the human body
EN ISO 14120:2015 Safety of machinery - Guards - General
requirements for the design and construction of fixed
and movable guards
EN ISO 13850:2015 Safety of machinery - Emergency-stop
design principles
EN 60204-1/A1:2014
Safety of machinery - Electrical equipment of
machines -
Part 1 General requirements
The following additional EU Directives relevant to this product were used:
EMC directive 2014/30/EC
Low voltage directive 2014/35/EC
The technical documentation for this machine was drafted according to Annex VII Section A. The
manufacturer undertakes to transmit these technical documents electronically to national authorities.
Authorised representative for the compilation of the technical documentation is:
Mr Werner Kister
Place, Date: Dermbach, 25 January 2012
Werner Kister, Executive Board