Technical Reference Manual
002-29852 Rev. *B
26.8.49 CSV_ILO
26.8.49.1 CSV
26.8.49.1.1 CSV_ILO_CSV_REF_CTL
Description:
Clock Supervision Reference Control
Address:
0x40261730
Offset:
0x0
Retention:
Retained
IsDeepSleep:
No
Comment:
Controls clock supervision for a clock tree.
Default:
0x0
Bit-field Table
Bits
7
6
5
4
3
2
1
0
Name
STARTUP [7:0]
Bits
15
14
13
12
11
10
9
8
Name
None [15:8]
Bits
23
22
21
20
19
18
17
16
Name
None [23:16]
Bits
31
30
29
28
27
26
25
24
Name
CSV_EN
[31:31]
None [30:24]
Bit-fields
Bits Name
SW
HW
Default or
Enum
Description
0:7
STARTUP
RW
R
0
Startup delay time -1 (in reference clock cycles), after
enable, from reference clock start to monitored clock
start.
At a minimum (both clocks running): STARTUP >=
(3) * FREQ_RATIO - UPPER, with
FREQ_RATIO = (Reference frequency / Monitored
frequency)
On top of that the actual clock startup delay and the
margin for accuracy of both clocks must be added.
31
CSV_EN
RW
R
0
Enables clock supervision, both frequency and loss.
CSV in Active domain: Clock supervision is reset
during DeepSleep and Hibernate modes. When
enabled it begins operating automatically after a
DeepSleep wakeup, but it must be reconfigured after
Hibernate wakeup.
CSV in DeepSleep domain: Clock supervision is reset
during Hibernate mode. It must be reconfigured after
Hibernate wakeup.
CSV in Backup domain: Clock supervision operates
during Hibernate mode, can be configured to wake
from Hibernate, and continues operating during reboot.
A CSV error detection is reported to the Fault
structure.
1701
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers