Technical Reference Manual
002-29852 Rev. *B
Bits Name
SW
HW
Default or
Enum
Description
8
I2C_BUS_ERROR
RW1C
RW1S
0
I2C slave bus error (unexpected detection of START
or STOP condition). This should not occur, it
represents erroneous I2C bus behavior. In case of a
bus error, the I2C slave state machine abort the
ongoing transfer. The Firmware may decide to clear
the TX and RX FIFOs in case of this error.
9
SPI_EZ_WRITE_STOP
RW1C
RW1S
0
SPI slave deselected after a write EZ SPI transfer
occurred.
10
SPI_EZ_STOP
RW1C
RW1S
0
SPI slave deselected after any EZ SPI transfer
occurred.
11
SPI_BUS_ERROR
RW1C
RW1S
0
SPI slave deselected at an unexpected time in the SPI
transfer. The Firmware may decide to clear the TX and
RX FIFOs in case of this error.
1441
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers