Technical Reference Manual
002-29852 Rev. *B
Bits Name
SW
HW
Default or
Enum
Description
31
PLL_LS_BYPASS
RW
R
0
Bypass level shifter inside the PLL. Unused, if no PLL
is present in the product.
0: Do not bypass the level shifter. This setting is ok for
all operational modes and vccd target voltage.
1: Bypass the level shifter. This may reduce jitter on
the PLL output clock, but can only be used when vccd
is targeted to 1.1V nominal. Otherwise, it can result in
clock degradation and static current.
1646
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers