Technical Reference Manual
002-29852 Rev. *B
4.13.2.20 CM4_DWT_FUNCTION3
Description:
Comparator Function registers
Address:
0xE0001058
Offset:
0x58
Retention:
Retained
IsDeepSleep:
No
Comment:
The FUNCTIONn register characteristics are:
Purpose: Controls the operation of comparator n.
Usage constraints:
The operation of comparator n depends also on the registers COMPn and MASKn, see
Comparator registers, COMPn on Arm TRM page C1-805 and Comparator Mask registers,
MASKn on Arm TRM page C1-805.
Reading this register clears some fields to zero. See the register field descriptions for more
information, and for the usage constraints of individual fields.
Configurations:
Implemented only when CTRL.NUMCOMP is nonzero, see Control register, CTRL on Arm
TRM page C1-797.
CTRL.NUMCOMP defines the number of implemented FUNCTIONn registers. Implemented
FUNCTIONn registers number from 0 to (NUMCOMP-1). Unimplemented registers are
UNK/SBZP.
Attributes: See Table C1-21 on Arm TRM page C1-797. See the register field descriptions for
information about the values of the RO bits in the register.
Default:
0x0
Bit-field Table
Bits
7
6
5
4
3
2
1
0
Name
CYCMATCH
[7:7]
None [6:6] EMITRANGE
[5:5]
None [4:4]
FUNCTION [3:0]
Bits
15
14
13
12
11
10
9
8
Name
DATAVADDR0 [15:12]
DATAVSIZE [11:10]
LNK1ENA
[9:9]
DATAVMATC
H [8:8]
Bits
23
22
21
20
19
18
17
16
Name
None [23:20]
DATAVADDR1 [19:16]
Bits
31
30
29
28
27
26
25
24
Name
None [31:25]
MATCHED
[24:24]
Bit-fields
Bits Name
SW
HW
Default or
Enum
Description
0:3
FUNCTION
RW
R
0
Selects action taken on comparator match:
0000 = Disabled or LinkAddr(), see LinkAddr support
on Arm TRM page C1-789.
For non-zero values:
- If DATAVMATCH is set to 1, see Table C1-16 on Arm
TRM page C1-786
- If DATAVMATCH is set to 0 then:
- If CYCMATCH is set to 0, see Table C1-14 on Arm
TRM page C1-782
- If CYCMATCH is set to 1, see Table C1-15 on Arm
TRM page C1-785.
This field resets to zero.
353
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers