Technical Reference Manual
002-29852 Rev. *B
13.5.1.7 FAULT_STRUCT_MASK0
Description:
Fault mask 0
Address:
0x40210050
Offset:
0x50
Retention:
Retained
IsDeepSleep:
No
Comment:
The MASK0, MASK1, MASK2 registers specify 'enables' for fault sources. Only 'enabled' fault
sources will be captured by this fault structure (and result in STATUS.VALID and INTR.FAULT
being set to '1'). When a fault source is captured, its corresponding bit field in PENDING0/1/2
is set to '0'.
When multiple fault structures are present and the mask fields of the fault structures overlap
(the same source is 'enabled' for multiple fault structures), an overlapping enabled pending
fault source is captured by a single fault structure that has not captured a fault (the fault
structure with the lowest index has precedence).
Default:
0x0
Bit-field Table
Bits
7
6
5
4
3
2
1
0
Name
SOURCE [7:0]
Bits
15
14
13
12
11
10
9
8
Name
SOURCE [15:8]
Bits
23
22
21
20
19
18
17
16
Name
SOURCE [23:16]
Bits
31
30
29
28
27
26
25
24
Name
SOURCE [31:24]
Bit-fields
Bits Name
SW
HW
Default or
Enum
Description
0:31
SOURCE
RW
R
0
Fault source enables:
Bits 31-0: Fault sources 31 to 0.
928
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers