Ihse Draco tera enterprise 480 Series, Руководство пользователя

Страница: 48 / 401

Access Options Draco tera enterprise
48
4.2 Control Options via OSD
4.2.1 OSD Keyboard Control
There are the following options to enter the OSD of the matrix:
•
via keyboard connected to the controller board
•
via keyboard connected to a CON Unit of an extender module
The following keyboard commands are used to open, and to exit the OSD:
Keyboard command Function
Hot Key, o or
Hot Key, m, o.
Open the OSD of the matrix or the master matrix in a cascading matrix system.
Hot Key, s, o Open the OSD of the sub matrix in a cascading matrix system.
Esc Exit the OSD in the main menu or go back one step in the menu structure.
Left Shift + Esc
Exit the OSD within the menus.
Left Ctrl + Esc
NOTICE
If the OSD is closed with one of the keyboard commands mentioned above, possible changes are not
saved. For information on saving changes, see configuration descriptions from chapter 6.9, from
page 139.
Entering the OSD and the Main Menu
To open the main menu, proceed as follows:
1. Press Hot Key + o or the Fast Key to open the OSD.
The Caps Lock and Scroll Lock LEDs on the keyboard are flashing, and the OSD is opened on the
display showing a list of all available CPU Devices.
2. Press Esc to open the main menu.
If the Enable CPU Selection checkbox is ticked in the Configuration menu, the CPU Device selection list
for switching CPU Devices will be opened initially. Pressing F7 within the selection list opens the OSD
menu.
Leaving the OSD

Press Esc in the main menu or press Left Shift + Esc anywhere within the OSD.
The OSD is closed without saving any changes and the signal of the currently active CPU Device
connection will be displayed.