Ihse Draco tera enterprise 480 Series Скачать руководство пользователя страница 83

Страница: 83 / 401

Draco tera enterprise

Configuration via OSD

The following parameters can be configured:

Network Interface #1

Field

Entry

Description

Dual Interface

Redundant network connection is deactivated.

Redundant network connection is activated (default).

DHCP

The network settings are automatically supplied by a DHCP

server.

Note:

If DHCP is activated and there is no physical network

connection available, the boot times might increase.

Function not active (default).

IP Address

Byte

Enter the IP address if DHCP is not active (default:

192.168.100.99).

Subnet Mask

Byte

Enter the subnet mask in the form "255.255.255.0" if DHCP is

not active (default: 255.255.255.0).

Gateway

Byte

Enter the gateway address in the form "192.168.1.1" if DHCP is

not active.

MAC Address

Byte

Unchangeable, is retrieved automatically.

Multicast

Byte

Enter the Multicast address if there is a Matrix Grid in use within

a Multicast group (default: 255.255.255.255).

Network Services

Field

Entry

Description

API Service #1

Activate the LAN interface at the matrix for access via

management software (default, API service port 5555/5565).

Function not active.

Grid Service #1

Activate Grid interface at the matrix for access via management

software (Grid Service Port 5557/5567).

Function not active (default).

SSL Services #1

Activate SSL encryption for API, management software (API),

management software API, management software and Matrix

Grid communication.

Function not active (default).

Syslog #1/#2

Syslog server for status request is active.

Function not active (default).

Syslog Server #1/#2

Byte

Input of the IP address of the Syslog servers in the form

“192.168.1.1” and of the Syslog port (default: 514).

The LDAP settings are explained in the chapter 6.3.6, page 85.

Содержание Draco tera enterprise 480 Series


















































































































































































































































































































































































































Результаты поиска

Содержание Draco tera enterprise 480 Series

Отзывы:

Бренды по названию

Популярные бренды

Ihse Draco tera enterprise 480 Series, Руководство пользователя

Результаты поиска

Содержание Draco tera enterprise 480 Series

Отзывы:

Бренды по названию

Популярные бренды