Ihse Draco tera enterprise 480 Series Скачать руководство пользователя страница 361

Страница: 361 / 401

Draco tera enterprise

Maintenance

361

13.3.3 Updating the Matrix Firmware

NOTICE

To process successful firmware updates and avoid failures:



Only use computers to update the matrices that are not integrated into the KVM system.



Ensure that the computer used for the update is not set into standby mode or sleep mode during the

update.



Save your configuration locally before starting the update.



Proceed an update via direct LAN connection for reasons of network stability.

NOTICE

Ensure that all USB 2.0 extender modules are only connected to the provided ports (fixed ports) before

you start the matrix update. Non-compliance may affect the stability of the update.

The firmware update of MATLOS.tfw has to be performed step by step. After each firmware update, the

matrix has to be restarted.
E.g., if you want to update your current firmware MATLOS version F01.05 to F01.08, proceed as follows:



Then update with version F01.06 and restart the matrix.



Then update with version F01.07 and restart the matrix.



Then update with version F01.08 and restart the matrix.

If required, the update files can be requested from the TechSupport.

The firmware of the matrix can be updated in this menu.

Fig. 266 Management software menu

Status & Updates - Update Matrix Firmware

Содержание Draco tera enterprise 480 Series


















































































































































































































































































































































































































Результаты поиска

Содержание Draco tera enterprise 480 Series

Отзывы:

Бренды по названию

Популярные бренды

Ihse Draco tera enterprise 480 Series, Руководство пользователя

Результаты поиска

Содержание Draco tera enterprise 480 Series

Отзывы:

Бренды по названию

Популярные бренды