Ihse Draco tera enterprise 480 Series, Руководство пользователя

Страница: 316 / 401

Operation via Management Software Draco tera enterprise
316
12.1.3 Predefining Macros
Predefined macros to switch the matrix without loading a new configuration can be created and activated in
this menu. This is a function of the management software, not of the matrix. The predefined macros are
locally saved on your computer.
Fig. 222 Management software menu Control - Presets
Creating a new Switch Macro
To create a new switch macro, proceed as follows:
1. Click
Control > Presets in the task area.
2. Click Activate Edit Mode in the toolbar.
3. Click ( New ) in the right column of the working area to open a new switch macro.
You are asked if the existing connections should be taken over for the new switch macro.
4. Click on a device in the corresponding columns (
Full Access
,
Video Only
or
Private Mode
) to drop
down the appropriate selection to set the desired switching operations or use the function for a
disconnect (
Disconnect CPU ).
5. Click ( Save ) in the right column of the working area to save the created switch macro.
A save dialog appears.
6. Enter a name for the new switch macro.
7. Click
Ok in the save dialog to confirm the new preset.
The new switch macro is listed in the right column.
8. Click Activate Edit Mode in the toolbar.