Ihse Draco tera enterprise 480 Series, Руководство пользователя

Страница: 307 / 401

Draco tera enterprise Operation via OSD
307
9.1.6 Switching a CON Unit to a local Source
CON Units connected to a local source can be locally switched via the matrix. Switching is performed
between the local source and the KVM connection and can be executed via OSD or keyboard command
(see chapter 8.1.5, page 293).
If you switch to the local source, the KVM connection will be automatically disconnected.
When using CON Units with the possibility to connect a local source in a MSC environment, the local
switching will be disabled.
Fig. 214 OSD Menu Switch - Local Source
To switch to a local source, proceed as follows:
1. Press Hot Key + o or the Fast Key to open the OSD.
All available CPU Devices are listed in the start menu.
2. Switch to the local source in the Local CPU list.
The switching operation to the local source will be performed immediately.
The local source will be only shown in the OSD if the connected CON Unit includes the option for a local
connection.
As an alternative, keyboard commands are available to switch to the local source (see chapter 8.1.5,
page 293).