Ihse Draco tera enterprise 480 Series, Руководство пользователя

Страница: 358 / 401

Maintenance Draco tera enterprise
358
13.3.2.10 System Check
The system check offers a diagnostic function for checking the device configuration. The feature indicates
non-optimal as well as incorrect settings and displays issues instructions. The system check is only used to
check plausibility and does not make any active configuration changes.
The following configuration parts are checked:
• Matrix Firmware
• Extender Module Firmware
•
Multi-Screen Control
•
EXT Units
• CPU Devices
• CON Devices
• Users
•
Macros
•
System Configuration
• Matrix Grid
The following notification levels can be shown:
Level Description
Info Information about system parts.
Ok System checks completed without any abnormalities.
Warning System checks revealed abnormalities in the configuration that point to
incomplete parts of the configuration, firmware differences, duplications, or
unconnected extender modules, but without being system critical.
Error System checks revealed errors in the configuration that can have both functional
and system critical influences on the system.
NOTICE
If the messages Warning or Error are generated by the system check function, the respective problem
will be described, and an issue instruction will be provided.
NOTICE
The system check of the matrix may take several minutes. The KVM system and the management
software can be used without restrictions during this time.
To start the system check, proceed as follows:
1. Click
System Check in the tool bar.
A query appears to check the system.
2. Click
Yes
to start the system check.
Fig. 263 Management software dialog Validate System