IBM PS700, Руководство по диагностике и обслуживанию

Страница: 76 / 294

Table 16. BA000010 to BA400002 Partition firmware SRCs (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v
See Chapter 3, “Parts listing, Type 8406,” on page 229 to determine which components are CRUs and which
components are FRUs.
Error code Description Action
BA090001 SCSD DASD: test unit ready failed;
hardware error
1. Go to “Checkout procedure” on page 184.
2. Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 260.
BA090002 SCSD DASD: test unit ready failed;
sense data available
1.
Go to “Checkout procedure” on page 184.
2.
Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 260.
BA090003 SCSD DASD: send diagnostic failed;
sense data available
1. Go to “Checkout procedure” on page 184.
2. Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 260.
BA090004 SCSD DASD: send diagnostic failed:
devofl cmd
1. Go to “Checkout procedure” on page 184.
2. Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 260.
BA09000A There was a vendor specification error.
1.
Check the vendor specification for
additional information.
2. If the problem persists:
a. Go to “Checkout procedure” on page
184.
b. Replace the system-board, as described
in “Replacing the FRU system-board
and chassis assembly” on page 260.
BA09000B Generic SCSD sense error
1. Verify that the SCSD cables and devices are
properly plugged.
2. Correct any problems that are found.
3. If the problem persists:
a. Go to “Checkout procedure” on page
184.
b. Replace the system-board, as described
in “Replacing the FRU system-board
and chassis assembly” on page 260.
BA09000C The media is write-protected
1. Change the setting of the media to allow
writing, then retry the operation.
2. Insert new media of the correct type.
3. If the problem persists:
a. Go to “Checkout procedure” on page
184.
b.
Replace the system-board, as described
in “Replacing the FRU system-board
and chassis assembly” on page 260.
64
Power Systems: Problem Determination and Service Guide for the IBM Power PS700 (8406-70Y)