IBM PS700, Руководство по диагностике и обслуживанию

Страница: 67 / 294

Table 16. BA000010 to BA400002 Partition firmware SRCs (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v
See Chapter 3, “Parts listing, Type 8406,” on page 229 to determine which components are CRUs and which
components are FRUs.
Error code Description Action
BA010013 The information in the error log entry
for this SRC provides network trace
data. Informational message. No action is required.
BA010014 The information in the error log entry
for this SRC provides network trace
data. Informational message. No action is required.
BA010015 The information in the error log entry
for this SRC provides network trace
data. Informational message. No action is required.
BA010020 A trace entry addition failed because of
a bad trace type.
1. Reboot the blade server.
2. If the problem persists:
a. Go to “Checkout procedure” on page
184.
b. Replace the system-board, as described
in “Replacing the FRU system-board
and chassis assembly” on page 260.
BA012010 Opening the TCP node failed.
1.
Reboot the blade server.
2.
If the problem persists:
a. Go to “Checkout procedure” on page
184.
b. Replace the system-board, as described
in “Replacing the FRU system-board
and chassis assembly” on page 260.
BA012011 TCP failed to read from the network
1. Reboot the blade server.
2. If the problem persists:
a. Go to “Checkout procedure” on page
184.
b.
Replace the system-board, as described
in “Replacing the FRU system-board
and chassis assembly” on page 260.
BA012012 TCP failed to write to the network.
1. Reboot the blade server.
2. If the problem persists:
a. Go to “Checkout procedure” on page
184.
b. Replace the system-board, as described
in “Replacing the FRU system-board
and chassis assembly” on page 260.
BA012013 Closing TCP failed.
1.
Reboot the blade server.
2.
If the problem persists:
a.
Go to “Checkout procedure” on page
184.
b. Replace the system-board, as described
in “Replacing the FRU system-board
and chassis assembly” on page 260.
Chapter 2. Diagnostics
55