IBM PS700, Руководство по диагностике и обслуживанию

Страница: 68 / 294

Table 16. BA000010 to BA400002 Partition firmware SRCs (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v
See Chapter 3, “Parts listing, Type 8406,” on page 229 to determine which components are CRUs and which
components are FRUs.
Error code Description Action
BA017020 Failed to open the TFTP package Verify that the Trivial File Transfer Protocol
(TFTP) parameters are correct.
BA017021 Failed to load the TFTP file Verify that the TFTP server and network
connections are correct.
BA01B010 Opening the BOOTP node failed.
1. Reboot the blade server.
2. If the problem persists:
a. Go to “Checkout procedure” on page
184.
b. Replace the system-board, as described
in “Replacing the FRU system-board
and chassis assembly” on page 260.
BA01B011 BOOTP failed to read from the network Perform the following actions that checkpoint
CA00E174 describes:
1. Verify that:
v
The bootp server is correctly configured;
then, retry the operation.
v
The network connections are correct;
then, retry the operation.
2.
If the problem persists:
a. Go to “Checkout procedure” on page
184.
b. Replace the system-board, as described
in “Replacing the FRU system-board
and chassis assembly” on page 260.
BA01B012 BOOTP failed to write to the network Perform the following actions that checkpoint
CA00E174 describes:
1. Verify that:
v
The bootp server is correctly configured;
then, retry the operation.
v
The network connections are correct;
then, retry the operation.
2. If the problem persists:
a. Go to “Checkout procedure” on page
184.
b. Replace the system-board, as described
in “Replacing the FRU system-board
and chassis assembly” on page 260.
BA01B013 The discover mode is invalid
1.
Reboot the blade server.
2.
If the problem persists:
a.
Go to “Checkout procedure” on page
184.
b. Replace the system-board, as described
in “Replacing the FRU system-board
and chassis assembly” on page 260.
56
Power Systems: Problem Determination and Service Guide for the IBM Power PS700 (8406-70Y)