IBM BladeCenter JS12, Руководство по диагностике и обслуживанию

Страница: 61 / 318

Table 13. B700xxxx Licensed internal code SRCs (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v
See Chapter 3, “Parts listing, Type 7998,” on page 235 to determine which components are CRUs and which
components are FRUs.
B700 xxxx Error Codes Description Action
6994 Service processor failure. Replace the system-board and chassis
assembly, as described in “Replacing the Tier 2
system-board and chassis assembly” on page
274.
6995 Informational system log entry only. No corrective action is required.
69C2 Informational system log entry only. No corrective action is required.
69C3 Informational system log entry only. No corrective action is required.
69D9 Host Ethernet Adapter (HEA) failure. Replace the system-board and chassis
assembly, as described in “Replacing the Tier 2
system-board and chassis assembly” on page
274.
69DA Informational system log entry only. No corrective action is required.
69DB System firmware failure.
1. Collect the platform dump information.
2.
Go to “Isolating firmware problems” on
page 222.
BAD1 The platform firmware detected an
error. Go to “Isolating firmware problems” on page
222.
F103 System firmware failure
1. Collect the event log information.
2. Collect the platform dump information.
3. Go to “Isolating firmware problems” on
page 222.
F104 Operating system error. System
firmware terminated a partition. Check the management-module event log for
partition firmware error codes (especially
BA00F104); then, take the appropriate actions
for those error codes.
F105 System firmware detected an internal
error
1. Collect the event log information.
2. Collect the platform dump information.
3. Go to “Isolating firmware problems” on
page 222.
F106 System firmware detected an error Replace the system-board and chassis
assembly, as described in “Replacing the Tier 2
system-board and chassis assembly” on page
274.
F10A System firmware detected an error Look for and correct B1xxxxxx errors.
F10B A processor resource has been disabled
due to hardware problems Replace the system-board and chassis
assembly, as described in “Replacing the Tier 2
system-board and chassis assembly” on page
274.
F120 Informational system log entry only. No corrective action is required.
Chapter 2. Diagnostics
47