IBM BladeCenter JS12, Руководство по диагностике и обслуживанию

Страница: 168 / 318

Table 23. 101-711 through FFC-725 SRNs (continued)
SRN FFC Description and Action
252B-718 252B 293 Temporary PCI bus error detected by adapter.
1. Check the BladeCenter management-module event log. If an error was recorded
by the system, see “POST progress codes (checkpoints)” on page 88.
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board and chassis assembly.
252B-719 252B Device bus termination power lost or not detected.
1.
Check the BladeCenter management-module event log. If an error was recorded
by the system, see “POST progress codes (checkpoints)” on page 88.
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board and chassis assembly.
252B-720 252B Adapter detected device bus failure.
1. Check the BladeCenter management-module event log. If an error was recorded
by the system, see “POST progress codes (checkpoints)” on page 88.
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board and chassis assembly.
252B-721 252B Temporary adapter detected device bus failure.
1. Check the BladeCenter management-module event log. If an error was recorded
by the system, see “POST progress codes (checkpoints)” on page 88.
2.
Replace any parts reported by the diagnostic program.
3.
Replace the system-board and chassis assembly.
252B-722 252B Device bus interface problem.
1.
Check the BladeCenter management-module event log. If an error was recorded
by the system, see “POST progress codes (checkpoints)” on page 88.
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board and chassis assembly.
252B-723 252B Device bus interface problem.
1. Check the BladeCenter management-module event log. If an error was recorded
by the system, see “POST progress codes (checkpoints)” on page 88.
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board and chassis assembly.
254E-201 254E 221 Adapter configuration error. Go to “Performing the checkout procedure” on page
187.
254E-601 254 Error log analysis indicates adapter failure. Go to “Performing the checkout
procedure” on page 187.
254E-602 254 Error log analysis indicates an error attention condition. Go to “Performing the
checkout procedure” on page 187.
254E-603 254 Error log analysis indicates that the microcode could not be loaded on the adapter.
Go to “Performing the checkout procedure” on page 187.
254E-604 254 Error log analysis indicates a permanent adapter failure. Go to “Performing the
checkout procedure” on page 187.
254E-605 254 Error log analysis indicates permanent adapter failure is reported on the other port
of this adapter. Go to “Performing the checkout procedure” on page 187.
254E-606 254 Error log analysis indicates adapter failure. Go to “Performing the checkout
procedure” on page 187.
254E-701 254E 221 Error log analysis indicates permanent adapter failure. Go to “Performing the
checkout procedure” on page 187.
154
JS12 Type 7998: Problem Determination and Service Guide