IBM BladeCenter JS12, Руководство по диагностике и обслуживанию

Страница: 170 / 318

Table 23. 101-711 through FFC-725 SRNs (continued)
SRN FFC Description and Action
256D-702 256D 221 Error Log Analysis indicates permanent adapter failure is reported on the other port
of this adapter.
1. Check the BladeCenter management-module event log. If an error was recorded
by the system, see “POST progress codes (checkpoints)” on page 88.
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board and chassis assembly.
25A0–xxx 2631 Configuring I/O planar control logic for IDE bus devices. Go to “Performing the
checkout procedure” on page 187.
25C4–xxx 25C4 Generic reference for Broadcom adapter. Go to “Performing the checkout procedure”
on page 187.
25C4-201 25C4 Configuration error. Go to “Performing the checkout procedure” on page 187.
25C4-701 25C4 Permanent adapter failure. Go to “Performing the checkout procedure” on page 187.
25C4-601 25C4 Download firmware error. Go to “Performing the checkout procedure” on page 187.
25C4-602 25C4 EEPROM read error. Go to “Performing the checkout procedure” on page 187.
2604-xxx 2604 Generic reference for 4Gb Fibre Channel PCI-X Adapter card. Go to “Performing the
checkout procedure” on page 187.
2604-102 2604 Reset Test failure for the Fibre Channel adapter card. Replace the 4Gb Fibre Channel
PCI-X Adapter card.
2604-103 2604 Register Test failure for the Fibre Channel adapter card. Replace the 4Gb Fibre
Channel PCI-X Adapter card.
2604-104 2604 SRAM Test failure for the Fibre Channel adapter card. Replace the 4Gb Fibre
Channel PCI-X Adapter card.
2604-105 2604 Internal Wrap Test failure for the Fibre Channel adapter card. Replace the 4Gb Fibre
Channel PCI-X Adapter card.
2604-106 2604 Gigabit Link Module (GLM) Wrap Test failure for the Fibre Channel adapter card.
Replace the 4Gb Fibre Channel PCI-X Adapter card.
2604-108 2604 221 Enhanced Error Handling Failure on the bus for the Fibre Channel adapter card. Go
to “Performing the checkout procedure” on page 187.
2604-110 2604 Enhanced Error Handling Failure on the Fibre Channel adapter card. Replace the
4Gb Fibre Channel PCI-X Adapter card.
2604-201 2604 221 Configuration Register Test Failure for the Fibre Channel adapter card. Go to
“Performing the checkout procedure” on page 187.
2604-203 2604 PCI Wrap Test Failure for the Fibre Channel adapter card. Replace the 4Gb Fibre
Channel PCI-X Adapter card.
2604-204 2604 221 DMA Test Failure for the Fibre Channel adapter card. Go to “Performing the
checkout procedure” on page 187.
2604-205 2604 221 Error on Read/Write Operation for the Fibre Channel adapter card. Go to
“Performing the checkout procedure” on page 187.
2604-701 2604 Error Log Analysis indicates that the adapter self-test failed for the Fibre Channel
adapter card. Go to “Performing the checkout procedure” on page 187.
2604-703 2604 Error Log Analysis indicates that an unknown adapter error has occurred for the
Fibre Channel adapter card. Go to “Performing the checkout procedure” on page
187.
2604-704 2604 Error Log Analysis indicates that an adapter error has occurred for the Fibre Channel
adapter card. Go to “Performing the checkout procedure” on page 187.
156
JS12 Type 7998: Problem Determination and Service Guide