IBM BladeCenter JS12, Руководство по диагностике и обслуживанию

Страница: 87 / 318

Table 14. BA000010 to BA400002 Partition firmware SRCs (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v
See Chapter 3, “Parts listing, Type 7998,” on page 235 to determine which components are CRUs and which
components are FRUs.
Error code Description Action
BA140004 The SCSI read/write optical send
diagnostic failed; devofl command.
1. Troubleshoot the SCSI devices.
2. Verify that the SCSI cables and devices are
properly plugged. Correct any problems
that are found.
3. Replace the SCSI cables and devices.
4. If the problem persists:
a. Go to “Checkout procedure” on page
186.
b. Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis
assembly” on page 274.
BA150001 PCI Ethernet BNC/RJ-45 or PCI
Ethernet AUI/RJ-45 adapter: internal
wrap test failure Replace the adapter specified by the location
code.
BA151001 10/100 Mbps Ethernet PCI adapter:
internal wrap test failure Replace the adapter specified by the location
code.
BA151002 10/100 Mbps Ethernet card failure
1.
Go to “Checkout procedure” on page 186.
2.
Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis assembly”
on page 274.
BA153002 Gigabit Ethernet adapter failure Verify that the MAC address programmed in
the FLASH/EEPROM is correct.
BA153003 Gigabit Ethernet adapter failure
1. Check for server firmware updates; then,
install the updates if available.
2. Replace the Gigabit Ethernet adapter.
BA154010 HEA software error
1.
Go to “Checkout procedure” on page 186.
2.
Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis assembly”
on page 274.
BA154020 The required open firmware property
was not found.
1. Reboot the blade server.
2. If the problem persists:
a. Go to “Checkout procedure” on page
186.
b. Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis
assembly” on page 274.
Chapter 2. Diagnostics
73