IBM BladeCenter JS12, Руководство по диагностике и обслуживанию

Страница: 100 / 318

Table 14. BA000010 to BA400002 Partition firmware SRCs (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v
See Chapter 3, “Parts listing, Type 7998,” on page 235 to determine which components are CRUs and which
components are FRUs.
Error code Description Action
BA340004 An internal firmware error occurred; the
open fabric manager parameter data
was corrupted.
1. Reboot the blade server.
2. If the problem persists:
a. Go to “Checkout procedure” on page
186.
b.
Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis
assembly” on page 274.
BA340005 An internal firmware error occurred; the
location code mapping table was
corrupted.
1. Reboot the blade server.
2. If the problem persists:
a. Go to “Checkout procedure” on page
186.
b. Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis
assembly” on page 274.
BA340006 An LP event communication failure
occurred reading the system initiator
capability data from the service
processor.
1.
Reboot the blade server.
2.
If the problem persists:
a.
Go to “Checkout procedure” on page
186.
b. Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis
assembly” on page 274.
BA340007 An internal firmware error occurred; the
open fabric manager system initiator
capability data was corrupted.
1. Reboot the blade server.
2. If the problem persists:
a.
Go to “Checkout procedure” on page
186.
b. Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis
assembly” on page 274.
BA340008 An internal firmware error occurred; the
open fabric manager system initiator
capability data version was not correct.
1. Reboot the blade server.
2. If the problem persists:
a. Go to “Checkout procedure” on page
186.
b. Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis
assembly” on page 274.
86
JS12 Type 7998: Problem Determination and Service Guide