IBM BladeCenter JS12, Руководство по диагностике и обслуживанию

Страница: 55 / 318

Table 13. B700xxxx Licensed internal code SRCs (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v
See Chapter 3, “Parts listing, Type 7998,” on page 235 to determine which components are CRUs and which
components are FRUs.
B700 xxxx Error Codes Description Action
0601 Informational system log entry only. No corrective action is required.
Note: This code and associated data can be
used to determine why the time of day for a
partition was lost.
0602 System firmware detected an error
condition.
1.
Collect the event log information.
2.
Go to “Isolating firmware problems” on
page 222.
0611 There is a problem with the system
hardware clock; the clock time is
invalid. Use the operating system to set the system
clock.
0621 Informational system log entry only. No corrective action is required.
0641 System firmware detected an error.
1. Collect the platform dump information.
2. Go to “Isolating firmware problems” on
page 222.
0650 System firmware detected an error.
Resource management was unable to
allocate main storage. A platform dump
was initiated.
1. Collect the event log.
2. Collect the platform dump data.
3. Collect the partition configuration
information.
4. Go to “Isolating firmware problems” on
page 222.
0651 The system detected an error in the
system clock hardware Replace the system-board and chassis
assembly, as described in “Replacing the Tier 2
system-board and chassis assembly” on page
274.
0803 Informational system log entry only. No corrective action is required.
0804 Informational system log entry only. No corrective action is required.
0A00 Informational system log entry only. No corrective action is required.
0A01 Informational system log entry only. No corrective action is required.
0A10 Informational system log entry only. No corrective action is required.
1150 Informational system log entry only. No corrective action is required.
1151 Informational system log entry only. No corrective action is required.
1152 Informational system log entry only. No corrective action is required.
1160 Service processor failure
1. Go to “Isolating firmware problems” on
page 222.
2.
Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis assembly”
on page 274.
1161 Informational system log entry only. No corrective action is required.
Chapter 2. Diagnostics
41