IBM BladeCenter JS12, Руководство по диагностике и обслуживанию

Страница: 294 / 318

SMS utility menu choices
Select SMS tasks from the SMS utility main menu. Choices on the SMS utility main
menu depend on the version of the firmware in the blade server. Some menu
choices might differ slightly from these descriptions.
v
Select Language
Select this choice to change the language that is used to display the SMS menus.
v
Setup Remote IPL (Initial Program Load)
Select this choice to enable and set up the remote startup capability of the blade
server or partition.
v
Change SCSI Settings
Select this choice to view and change the addresses of the SCSI controllers that
are attached to the blade server.
v
Select Console
Select this choice to select the console on which the SMS menus are displayed.
v
Select Boot Options
Select this choice to view and set various options regarding the installation
devices and boot devices.
Note: If a device that you are trying to select (such as a USB CD drive in the
BladeCenter media tray) is not displayed in the Select Device Type menu, select
List all Devices and select the device from that menu.
Creating a CE login
If the blade server is running an AIX operating system, you can create a customer
engineer (CE) login to perform operating system commands that are required to
service the system without being logged in as a root user.
The CE login must have a role of Run Diagnostics and be a primary group of
System. This enables the CE login to perform the following tasks:
v Run the diagnostics, including the service aids, certify, and format.
v
Run all the operating-system commands that are run by system group users.
v
Configure and unconfigure devices that are not in use.
In addition, this login can have Shutdown Group enabled to allow use of the
Update System Microcode service aid and the shutdown and reboot operations.
The recommended CE login user name is qserv.
280
JS12 Type 7998: Problem Determination and Service Guide